JOB FOR EXPERIENCE CANDIDATE OPENINGS

JOB OPENINGS FOR EXPERIENCED PROFESSIONALS

No.	JOB CODE	POSITION	LOCATION	JOB RESPONSIBILITIES	REQUIREMENTS	EMAIL TO
1	KL-09/21-046	Engineer (Project Management)	Kuala Lumpur	• Assist the Project Management Team to all matters relating to the project • Assist Project Management Team in supervising the engineers and personnel undertaking the project including subcontractor and third party. Multi-tasking is a must. • Plan and coordinate project management activities and interface issues between disciplines • Review all design work of engineering deliverables required for the onshore, offshore oil and gas facilities. • Conduct technical review of the project involving all disciplines to ensure compliance to client's specification • Initiate, recommend and effect improvements in the project plan in a pro-active manner such that quality, costs and time scales are met. • Plan and coordinate project PDMS review session involving all disciplines • Prepare and coordinate project reporting • Coordinate project planning and scheduling • Undertake any other duties as appropriate within their competency, as required by their supervisor from time to time • Integrated and/or consider Quality, Health, Safety, Security and Environmental (QHSSE) element in all activities to ensure company’s QHSSE objectives and targets are met	• A recognized engineering degree in relevant field • Registered as engineer with Board of Engineers Malaysia. • 4 to 6 years of experience in planning, coordinating and executing oil and gas projects	jobkl@mie-energy.com
2	KL-09/21-043	Senior Drafter (Pipeline)	Kuala Lumpur	• Reporting direct to the designer and responsible to the designer relating to the project. • Assist Design Coordinator, Senior Designers, and Designers for all matters relating to the project. • Provide drafting support for Design Engineer in preparing other required deliverables • Prepare pipeline drawings such as; • Pipeline Route Drawings • Pipeline Approach Drawings • Pipeline detailed drawings such as SACP, CWC, Coatings and etc • Riser General Arrangements • Riser Isometric Drawings • Pipeline Alignment Sheets • Pipeline Schematic Drawing • Riser Clamp Detailed Drawings • Other Pipeline Drawings • Demonstrated experiences and have good understanding on pipeline drawings in Conceptual, FEED and Detailed Engineering Design stage. Construction phase experience is an added advantage. • Check the engineering deliverables for correctness and quality, marks-up any comments or revision on these documents and ensure that the changes are included and completed on the latest copies of all affected documents. • Responsible to incorporate all mark-up and comments in drawings from internal or external. • Responsible to perform self-check on the drawings for correctness and quality, revision and ensure that the changes are included and completed on the latest copies of all affected drawings. • Responsible as care taker on all drawings during execution of this job and ensure all those drawings, comments and mark-up are properly filed for traceability. • Ensure all documentation during the design stages are properly filed for traceability. • Filing system for drawing as per QA manual. • Undertake any other duties as appropriate within their competency, as required by their supervisor from time to time. • Integrated and/or consider Quality, Health, Safety, Security and Environmental (QHSSE)element in all activities to ensure company’s QHSSE objectives and targets are met	• Minimum Professional Certificate in Engineering or relevant field. • Minimum 5 years of solid working experience in Oil & Gas Industry especially in Pipeline engineering deliverables. • Proficiency in AUTOCAD and Microsoft Office software (min. Excel and Word) • Knowledge in 3D modelling is an added advantage	jobkl@mie-energy.com
3	KL-08/21-041	Designer PDMS & SP3D (Mechanical & Piping)	Kuala Lumpur	• Prepare technical drawings from design sketches and engineering data. • Monitor the effectiveness of the project quality system and recommends changes for improvements where applicable. • Check the engineering deliverables for correctness and quality, marks-up any comments or revision on these documents and ensure that the changes are included and completed on the latest copies of all affected document • Report direct to the respective Senior Discipline Engineer and responsible to the Senior Discipline Engineer relating to the project. • Assist Discipline Engineer to perform site visit, red line mark-up and site visit report. • Ensure all the red line mark-ups are updated / incorporated correctly to the as-built drawings. • Undertake any other duties as appropriate within their competency, as required by their supervisor from time to time. • Integrated and/or consider Quality, Health, Safety, Security and Environmental (QHSSE) element in all activities to ensure company’s QHSSE objectives and targets are met	• Certificate/Diploma in engineering or any related field • 5 years of relevant working experience in Oil & Gas Industry. • Good command in design software such as SP3D, Autocad, PDMS & etc • Good command in Microsoft Office • Possess good communication and writing skill in English and Bahasa Malaysia	jobkl@mie-energy.com
4	KL-04/21-040	Senior Naval Architect/ Engineer	Kuala Lumpur	The scope of work includes but not limited to: • Station-keeping and Mooring System Design • Vessel Stability and compliance with Regulatory Codes • Hydrodynamics and Global Response Analysis • Marine Transportation & Installation • Perform analysis and review of load out, sea fastening, transportation and installation • Knowledge of material grades, fabrication yard procedures and offshore equipment	• Degree in Naval Architect/ Civil Engineering or equivalent • Registered with certified institution with minimum experience of ten (10) years in design engineering and practical experience in upstream oil and gas industry • Preferable candidate with knowledge in MOSES software • Registered with Board of Engineers Malaysia (BEM)	jobkl@mie-energy.com
5	KL-02/21-013	Senior Engineer (Mechanical & Piping Engineering)	Kuala Lumpur	• Able to perform pipe stress analysis using CAESAR II software. • Having previous experience in greenfield, brownfield and plant modification projects. • Familiar with coordination work with civil & structural, mechanical, instrumentation and electrical interfacing with regard to layout and piping design. • Familiar with international codes and standard (ASME 31.3, ASME, API, PTS, SHELL DEP, etc). • Good knowledge in preparation of engineering specifications and job instructions for piping designs, Insulations, painting, etc). • Good knowledge in plant layout planning and detailed piping design in view of construction, process flow scheme, machinery operation, etc). • Able to carry out site survey in order to gain required information or verification of existing plant documentation.	• Degree in Mechanical Engineering or Related Field. • Registered with Board of Engineers Malaysia (BEM). • Minimum Five (5) Years of Relevant Working Experience in Oil and Gas. • Good command in Microsoft Office and relevant Engineering Software. • Possess good communication and writing skill in English and Bahasa Malaysia.	jobkl@mie-energy.com
6	KL-03/21-014	Admin Assistant Cum Despatch (Human Resources & Administration)	Kuala Lumpur	• To attend daily dispatch duties • To dispatch/collect documents and parcel to or from office. • Check collect and direct mails from mailbox daily and direct to the respective person. • Maintaining the condition of the office and record any problem for necessary repairs. • Maintains stock lists and order supplies as needed. • Photocopies and files appropriate documents as needed. • Performing general office clerk duties and errands.	• Minimum SPM • Possess a valid driving license (B2 or D). • Possess own transport. • Basic computer skill (ie; Words & Excel)	jobkl@mie-energy.com
7	KTH-02/21-033	Drafter (Process)	Kerteh	• Prepare technical design drawings • Assist design coordinator and senior designers for all matters relating to the project • Check the engineering deliverables for correctness and quality, marks-up any comments or revision on these documents and ensure that the changes are included and completed on the latest copies of all affected documents • Reporting direct to the designer and responsible to the designer relating to the project • Responsible to incorporate all mark-up and comments in drawings from internal or external • Responsible to perform self-check on the drawings for correctness and quality, revision and ensure that the changes are included and completed on the latest copies of all affected drawings • Responsible as care taker on all drawings during execution of this job and ensure all those drawings, comments and mark-up are properly filed for traceability • Ensure all documentation during the design stages are properly filed for traceability • Filing system for drawing as per QA manual • Undertake any other duties as appropriate within their competency, as required by their supervisor from time to time • Integrated and/or Consider Quality, Health, Safety, Security and Environmental (QHSSE) element in all activities to ensure company’s QHSSE objectives and targets are met	• Certificate/Diploma in engineering or any related field • Familiar with Autocad / ZWCAD • Basic knowledge in Microsoft Office • Able to understand process drawings • Possess one (1) year of working experience in oil & gas industry • Fresh graduate are encouraged to apply	jobkerteh@mie-energy.com
8	KL-02/21-037	PHP Programmer (Information Technology)	Kuala Lumpur	•1st Level Support (Technical) • Perform asset registration • Manage asset stock (PC, Laptop, Monitor) • Perform PC & Laptop corrective maintenance • Perform PC & Laptop preventive planned maintenance • Manage PC & Laptop mapping drive • Manage printer • Perform PC & Laptop hardening & security • Manage Antivirus • Perform software installation & configuration • Software coding • System analysis • Coding versioning control • 1st Level Support (Application) • System Tester • Pre development documentation • Post development documentation • System UX • Webmaster • Company graphic (logo, banner, graphic, sticker, company profile layout, corporate slide, etc) as per requested by other department	• Candidate must possess at least Diploma/Degree in Information Technology / Computer science • Able to communicate & write in Bahasa Malaysia & English. • Preferably minimum 1 year of working experience	jobkl@mie-energy.com
9	KL-04/21-038	Engineer (Planning)	Kuala Lumpur	• Develop, validate and prepare project planning package (i.e. Method for progress measurement, overall project schedule, WBS, CPN, bar chart, deliverable register, S-Curve, project man power loading, man hour histogram and others as required) are according to PEQP or clients requirements • Prepare, monitor and analyze project progress, man hour’s expenditures and advise the project manager on any delays/critical activities and propose the solution where appropriate to avoid the delay • Attend project progress meeting (whenever required) and to liaise with the client on the agreed planning targets for the project and prepare revised schedule as necessary • Provide support for technical bid proposals and clarification • Assist the planning and cost control manager in the day to day performance of the work. • Undertake any other duties as appropriate within their competency, as required by their supervisor from time to time • Integrate and/or consider Quality, Health, Safety, Security and Environmental (QHSSE) element in all activities to ensure company’s QHSSE objectives and targets are met	• A recognized degree in engineering or equivalent • Possess at least 1 year of experience in oil & gas industry • Fresh graduate are encouraged to apply	jobkl@mie-energy.com
10	KL-02/21-025	Corporate, Contract And Business Support Executive	Kuala Lumpur	•To Provide Support to The Management on Day-To-Day Activities and Acting as A First Point of Contact in Correspondence and Phone Calls •To Manages the Management Schedule By maintaining Calendars and Arranging Meetings Conferences, Teleconferences, And Travel •Must Be Computer Literate and Good in Microsoft Office •To Deliver a Range of Administrative Support to Senior Officers and Ensure Systems or Processes Are Maintained to an Agreed Standard or Specification, To Maximize Service Quality and Continuity •To Ensure That Confidentiality Is Maintained at All Times, Particularly When Dealing with Issues Involving Restricted Access to Information and/or Senior Officer. To Ensure That Appropriate Discretion Is Exercised When Dealing with Sensitive (Including Politically Sensitive) Information and Enquiries, Including Media Enquiries, Member Enquiries and From Other Organization •To Ensure New or Existing Contract, Mou and Registration on Company Level Are Properly Maintain •To Ensure All Matters Affecting the Contract Are on A Sound Commercial Basis and Are Contractually Viable	•Candidate Must Possess At Least Diploma/Degree In Business Administration or Equivalent •Able To Communicate & Write in Bahasa Malaysia & English •Must Be Computer Literate and Good in Microsoft Office •Preferably Minimum One (1) Year of Working Experience	jobkl@mie-energy.com
11	KL-10/21-053	Engineer II (Mechanical & Piping)	Kuala Lumpur	• Monitor the effectiveness of the project quality system and recommends changes for improvements where applicable. • Undertake site verification visit and prepare site visit report as required • Ensure self-check and discipline check • Interdisciplinary interface • Meeting / query with Client/Vendor if required. • Participate in engineering review if required • Interface with other disciplines as required • Inform Lead / senior Engineer on daily and weekly work progress including planned activities • Ensure design consistency between design basis, calculations / analysis, reports, specifications, datasheets and drawings • Check the engineering deliverables for correctness and quality, marks-up any comments or revision on these documents and ensure that the changes are included and completed on the latest copies of all affected documents. • Conduct engineering analysis and recommend technical solutions. • Generate detailed engineering drawings. • Filing of project document, drawing and reports as per QA manual. • Undertake any other duties as appropriate within their competency, as required by their supervisor from time to time • Integrated and/or consider Quality, Health, Safety, Security and Environmental (QHSSE) element in all activities to ensure company’s QHSSE objectives and targets are met	• A recognized degree in Mechanical Engineering or relevant field. • Registered as engineer with Board of Engineers Malaysia. • 3 years to 6 years of solid working experience in Oil & Gas Industry	jobkl@mie-energy.com
12	KL-10/21-054	Engineer II (Mechanical & Piping - Rotating)	Kuala Lumpur	• Monitor the effectiveness of the project quality system and recommends changes for improvements where applicable. • Undertake site verification visit and prepare site visit report as required • Ensure self-check and discipline check • Interdisciplinary interface • Meeting / query with Client/Vendor if required. • Participate in engineering review if required • Interface with other disciplines as required • Inform Lead / senior Engineer on daily and weekly work progress including planned activities • Prepare calculations / analysis, reports, specifications, datasheets and drawings relevant to Rotating equipment / Turbo-machinery • Ensure the engineering deliverables correctness and quality, marks-up any comments or revision on these documents and ensure that the changes are included and completed on the latest copies of all affected documents. • Assist in conducting engineering analysis and recommend technical solutions. • Generate detailed engineering drawings where applicable. • Filing of project document, drawing and reports as per QA manual • Undertake any other duties as appropriate within their competency, as required by their supervisor from time to time • Integrated and/or consider Quality, Health, Safety, Security and Environmental (QHSSE) element in all activities to ensure company’s QHSSE objectives and targets are met	• A recognized degree in Mechanical Engineering or relevant field. • Registered as engineer with Board of Engineers Malaysia. • 3 years to 6 years of solid working experience in Oil & Gas Industry with direct experience in Rotating/Turbo-Machinery design.	jobkl@mie-energy.com
13	KL-10/21-055	Drafter (Instrument)	Kuala Lumpur - 1pax Kerteh - 1pax	• Prepare technical design drawings. • Reporting direct to the designer and responsible to the designer relating to the project. • Responsible to incorporate all mark-up and comments in drawings from internal or external. • Responsible to perform self-check on the drawings for correctness and quality, revision and ensure that the changes are included and completed on the latest copies of all affected drawings. • Responsible as care taker on all drawings during execution of this job and ensure all those drawings, comments and mark-up are properly filed for traceability. • Ensure all documentation during the design stages are properly filed for traceability. • Filing system for drawing as per QA manual. • Undertake any other duties as appropriate within their competency, as required by their supervisor from time to time. • Integrated and/or consider Quality, Health, Safety, Security and Environmental (QHSSE)element in all activities to ensure company’s QHSSE obsjectives and targets are met	• Minimum Professional Certificate in Engineering or relevant field. • Minimum 3 years of working experience as Drafter • Good command in design software such as AutoCad. • Possess skill in PDMS is an advantage.	jobkl@mie-energy.com jobkerteh@mie-energy.com
14	KL-10/21-056	Drafter (Civil & Structure)	Kuala Lumpur	• Assist Design Coordinator and Senior Designers for all matters relating to the project. • Assist team in CAD drawing and designing tasks • Reporting direct to the designer and responsible to the designer relating to the project. • Responsible to incorporate all mark-up and comments in drawings from internal or external. • Responsible to perform self-check on the drawings for correctness and quality, revision and ensure that the changes are included and completed on the latest copies of all affected drawings. • Prepares documents and transmittal form for submissions. • Responsible as care taker on all drawings during execution of this job and ensure all those drawings, comments and mark-up are properly filed for traceability. • Ensure all documentation during the design stages are properly filed for traceability. • Filing system for drawing as per QA manual. • Undertake any other duties as appropriate within their competency, as required by their supervisor from time to time. • Integrated and/or consider Quality, Health, Safety, Security and Environmental (QHSSE)element in all activities to ensure company’s QHSSE objectives and targets are met	• Minimum Professional Certificate in Engineering or relevant field. • Advance Knowledge of Auto Cad Software.	jobkl@mie-energy.com